Home / CUAV NEO 4 SE GPS Module with u-blox MIA-M10Q (M10) GNSS, DroneCAN, ST IIS2MDC Compass

CUAV NEO 4 SE GPS Module with u-blox MIA-M10Q (M10) GNSS, DroneCAN, ST IIS2MDC Compass

$73.5

Quantity

ADD TO CART

BUY IT NOW

Detail

Overview

CUAV NEO 4 SE is a GPS Module (GNSS module) based on the u-blox M10 receiver system, designed for multi-GNSS positioning and DroneCAN communication. It supports BeiDou, Galileo, GLONASS, and GPS/QZSS systems and integrates an electronic compass and RGB status lighting.

Key Features

Receiver: u-blox MIA-M10Q (u-blox M10 satellite receiver system); supports four GNSS concurrently (BeiDou, Galileo, GLONASS, GPS/QZSS)
Precise positioning design: integrates dual SAW + LNA; TCXO noted in module design
Processor: STM32H5 Arm Cortex-M33, up to 250 MHz; self-developed M4C architecture software
Built-in ST IIS2MDC electronic compass (magnetic field dynamic range up to ±50 Gs; temperature offset compensation function)
DroneCAN protocol; stated compatibility with ArduPilot and PX4 open source platform protocol stacks
Multi-functional RGB status light: 8-channel bus RGB light group; linked with built-in buzzer; supports controller disarming switch, battery level, positioning, and fault status indications

For customer service and technical support, contact support@rcdrone.top or visit https://rcdrone.top/.

Specifications

Product	CUAV NEO 4 SE GPS Module (GNSS Module)
Receiver type	u-blox MIA-M10Q
Processor	STM32H5 Arm Cortex-M33 250 MHz
Frequency band	GPS: L1 C/A GLONASS: L10F BeiDou: B11/B1C Galileo: E1B/C QZSS: L1 C/A L1S SBAS L1 C/A: WAAS / EGNOS / MSAS / GAGAN
Number of concurrent GNSS	BeiDou / Galileo / GLONASS / GPS / QZSS (supports four GNSS concurrently)
Oscillators	TCXO
Acquisition	Cold start: 27 s Hot start: 1 s Aided start: 1 s
Nav. update rate	Up to 10 Hz (4 concurrent GNSS) Up to 25 Hz (single GNSS)
Horizontal position accuracy	1.5 m CEP
Signal integrity	RF interference detection and reporting; signal anomaly detection and reporting
Protocol	DroneCAN
Firmware upgrade	Support
Firmware	CUAV M4C GNSS
Run firmware	CUAV M4C PMU2
Data interface	JST GH 1.25 4P
Input voltage	4.7 to 5.2 V
Operating temperature	-10 to 80°C
Size (spec)	60 x 60 x 16.1 mm
Weight (spec)	33 g
Size diagram (NEO 4 SE Size)	60 mm; 16.1 mm; 79 mm; 2 mm; 12 mm
Weight (listing)	0.5 kg
Dimensions (listing)	10 x 10 x 5 cm
Product variant	MIA-M10Q

What’s Included

NEO 4 SE x 1
CAN cable (35 cm) x 1
GPS stand x 1
3M double-sided tape x 1
Fixing screws x 2

Applications

DroneCAN GNSS positioning for systems using ArduPilot and PX4 protocol stacks (as stated)

Details

CUAV NEO 4 SE GPS, The NEO 4 SE GNSS Module offers precise positioning, DroneCAN support, and compatibility with ArduPilot/PX4 for reliable drone navigation in dynamic environments.

The NEO 4 SE GNSS Module integrates a u-blox M10 receiver, self-developed M4C software, and DroneCAN protocol. It features a built-in ST IIS2MDC compass, RGB status light, and compatibility with ArduPilot and PX4 open-source platforms. Designed for high flexibility and safety, it delivers precision positioning and seamless integration—ideal for advanced drone navigation systems that demand reliable, accurate performance in dynamic environments.

CUAV NEO 4 SE GPS, NEO-4 SE supports four GNSS for enhanced urban accuracy, part of u-blox M10 system.

NEO 4 SE supports four GNSS: BeiDou, Galileo, GLONASS, GPS/QZSS. Optimizes signals for better location accuracy in tough areas like urban canyons. Part of u-blox M10 Satellite Receiver System.

CUAV NEO 4 SE GPS, NEO 4 SE GPS boosts sensitivity and accuracy with TCXO, dual LNA, and RF filtering; visuals show improved signal clarity.

NEO 4 SE GPS uses TCXO, dual LNA, and RF filtering for enhanced sensitivity, faster acquisition, and precise positioning. Visuals compare signal clarity before and after filtering.

CUAV NEO 4 SE GPS, High-performance STM32H5 with Cortex-M33 (250 MHz) runs CUAV's M4C software for customizable, upgradable drone control.

High-performance STM32H5 processor with Cortex-M33 CPU up to 250 MHz. Runs flexible M4C software by CUAV for efficient customization and upgrades.

CUAV NEO 4 SE GPS, The NEO 4 SE features an ST IIS2MDC compass with ±50 Gs range, temperature compensation, and enhanced anti-interference performance.

NEO 4 SE integrates ST IIS2MDC electronic compass with ±50 Gs magnetic range, temperature compensation, and superior anti-interference performance compared to similar products.

CUAV NEO 4 SE GPS, NEO 4 SE uses DroneCAN, compatible with ArduPilot and PX4, offering broad integration, expandability, and flexibility for drone systems.

NEO 4 SE uses DroneCAN protocol, compatible with ArduPilot and PX4. Offers broad applications, expandability, and flexibility for drone systems integration.

CUAV NEO 4 SE GPS, NEO 4 SE features an RGB status light controller with scene recognition, alerts, and buzzer for flight modes, battery, positioning, and faults.

Multi-Functional RGB Status Light Controller Disarming Switch with 8-channel bus, intelligent scene recognition, and built-in buzzer for flight modes, battery, positioning, fault alerts via illuminated indicators on NEO 4 SE.

CUAV NEO 4 SE GPS, NEO-4 SE GPS device: 60mm dia, 79mm height, 16.1mm body, 2mm thick, 12mm base.

NEO 4 SE Size dimensions: 60mm diameter, 79mm height, 16.1mm body, 2mm thickness, 12mm base width. Technical schematic for GPS device.

CUAV NEO 4 SE GPS, NEO 4 SE includes device, CAN cable, GPS stand, tape, and two screws for installation.

NEO 4 SE packing list includes device, CAN cable, GPS stand, double-sided tape, and two fixing screws for installation.

Customer Reviews

No comments

SEE ALL

BACK