5810 Centrifugal Metal Atomization Nozzle Sprinkler With 12S 14S ESC For Dji T20 T30 T40 Agricultural Plant Protection Drone UAV Agriculture Drone Accessories
-
Detail
5810 Centrifugal Metal Atomization Nozzle Sprinkler SPECIFICATIONS
Wheelbase: Screws
Use: Vehicles & Remote Control Toys
Upgrade Parts/Accessories: Centrifugal Nozzle
Tool Supplies: Assembly Category
Technical parameters: Value 2
Size: 5810
Remote Control Peripherals/Devices: Centrifugal Nozzle
Recommend Age: 12+y
Recommend Age: 14+y
RC Parts & Accs: Centrifugal Nozzle
Quantity: 1 pcs
Origin: Mainland China
Model Number: Centrifugal Nozzle
Material: Metal
Four-wheel Drive Attributes: Assemblage
For Vehicle Type: Airplanes
Fruit tree planting is generally scattered, with uneven spacing, tall trees, large crowns, and many leaves.
Since most of the nozzles on the market are pressure type or centrifugal single atomizing disc, the atomization generated is not fine enough, it is difficult to penetrate the fruit tree under the condition of insufficient wind pressure, and it is difficult to float in the fruit tree under the wind pressure. The liquid medicine is difficult to adsorb to the back of the leaves.
Therefore, according to the market demand, we designed a double atomizing disc nozzle, the liquid medicine enters the inner spinner through the diverter plate, and the inner spinner is designed with 24 toothed arc blades.
The atomizing disc is driven by a motor to rotate at a high speed. The liquid is atomized to 100-200 microns.
The atomized particles atomized by the inner atomizing disk are further atomized by the outer atomizing disk.
The particles are further broken and atomized by nylon screws, and static electricity is generated by friction. The airflow generated by the rotation of the surrounding blades is atomized once, so that the atomization can achieve a smoke effect of 50-100 microns.
Because the atomized particles are very fine, the atomized particles are rotated in the fruit tree by the down-pressure wind field of the drone, and can be effectively adsorbed on the front and back of the leaves.
Model: 5810 PRO
Voltage: 12s-14s
Current: 7A
Speed: 20000 rpm
Maximum flow: 3L
Rated power: 360W
Control method: PWM
Weight: 427G
Working temperature: -10-50 degrees
Protection class: IP55
Control method: stepless speed regulation
Inlet and outlet pipe diameter: 8MM
Plug Specifications: Quick Plug
Cable length: 1.25 meters
Atomized Micron: 50-100 MicronSpray width: 6-8 meters (the wheelbase of the model, the flying height defines the spray width)Precautions for product use:1: The nozzle cannot be idling, and the water pump should be turned on at the same time when it is running (the liquid medicine needs to flow to cool the nozzle motor)2: When the 12S power is supplied, the speed of the print head is opened at 85% (analog 1000-1850)3: When the power supply is 14S, the speed of the nozzle is turned on at 75% (analog 1000-1750)4: The nozzle must be turned off when the liquid is finished (some flight controllers do not have centrifugal nozzles, and the nozzles need to be manually turned off)5: After each operation, you must fill up a box of clean water, add cleaning fluid, turn on the centrifugal nozzle, spray a box of water, and idling for 30 seconds. The purpose is to clean the residual pesticides to prevent corrosion, solidification and damage to the motor bearings.
This nozzle features Tektronix 12S, 14S ESC (Electronic Speed Controller) compatibility T20, T30, and T40 agricultural drones. It is designed to provide precise atomization and sprinkling capabilities for crop protection and precision agriculture applications.



























-
Customer ReviewsNo comments